Same to https://github.com/go-gitea/gitea/pull/22674 and
https://github.com/go-gitea/gitea/pull/22605
Sorry to create 3 PR to fix this.
I checked all span with class `org-visibility`, i think this is the last
one :)
And I found that private/limited user has no private/limited tag in
dashboard. but org does.
If it is ok i will add this feature in another pr.
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Fixes#22183
Replaces #22187
This PR adds secrets for users. I refactored the files for organizations
and repos to use the same logic and templates. I splitted the secrets
from deploy keys again and reverted the fix from #22187.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
EDIT: The main change of this PR was resolved by #22599. This
complements that PR for some cases without label and complicated layout
to be added.
NOTE: Contributed by @Forgejo.
The use of ui colors (red, green, etc) should be limited to actionable
or dismissable entries. Before this commit, a green/red label was used
to display issues count on each repository. This did not add any
meaningful information to the list.
Removing the label reduces ambiguity and makes the list easier to scan
visually.
---------
Co-authored-by: delvh <dev.lh@web.de>
Don't generate nested `<p>`, use `<div>` like description on the user
profile page.
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Currently only a single project like milestone, not multiple like
labels.
Implements #14298
Code by @brechtvl
---------
Co-authored-by: Brecht Van Lommel <brecht@blender.org>
Added ARIA navigation landmark to navigation bar and aria label for both
nav bar and footer.
Contributed by @forgejo.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
On activating local accounts, the error message didn't differentiate
between using a wrong or expired token, or a wrong password. The result
could already be obtained from the behaviour (different screens were
presented), but the error message was misleading and lead to confusion
for new users on Codeberg with Forgejo.
Now, entering a wrong password for a valid token prints a different
error message.
The problem was introduced in 0f14f69e60.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Avoid empty labelled anchor in repo without commits.
Contributed by @forgejo.
<!--
Please check the following:
1. Make sure you are targeting the `main` branch, pull requests on
release branches are only allowed for bug fixes.
2. Read contributing guidelines:
https://github.com/go-gitea/gitea/blob/main/CONTRIBUTING.md
3. Describe what your pull request does and which issue you're targeting
(if any)
-->
Currently the value doesn't match the model, so selecting it results in
a 500.
e8ac6a9aea/models/auth/token_scope.go (L42)
Signed-off-by: jolheiser <john.olheiser@gmail.com>
Fixes https://github.com/go-gitea/gitea/issues/22601
At people and team page, we have red private tag or orange limited tag,
but at repo page, it is gray (basic).
I think it is better to set them into same color (basic).
This PR adds the support for scopes of access tokens, mimicking the
design of GitHub OAuth scopes.
The changes of the core logic are in `models/auth` that `AccessToken`
struct will have a `Scope` field. The normalized (no duplication of
scope), comma-separated scope string will be stored in `access_token`
table in the database.
In `services/auth`, the scope will be stored in context, which will be
used by `reqToken` middleware in API calls. Only OAuth2 tokens will have
granular token scopes, while others like BasicAuth will default to scope
`all`.
A large amount of work happens in `routers/api/v1/api.go` and the
corresponding `tests/integration` tests, that is adding necessary scopes
to each of the API calls as they fit.
- [x] Add `Scope` field to `AccessToken`
- [x] Add access control to all API endpoints
- [x] Update frontend & backend for when creating tokens
- [x] Add a database migration for `scope` column (enable 'all' access
to past tokens)
I'm aiming to complete it before Gitea 1.19 release.
Fixes#4300
Addition to #22056
This PR adds a hint to mail text if replies are supported.
I can't tell if the text structure is supported in every language. Maybe
we need to put the whole line in the translation file and use
parameters.
This PR introduce glob match for protected branch name. The separator is
`/` and you can use `*` matching non-separator chars and use `**` across
separator.
It also supports input an exist or non-exist branch name as matching
condition and branch name condition has high priority than glob rule.
Should fix#2529 and #15705
screenshots
<img width="1160" alt="image"
src="https://user-images.githubusercontent.com/81045/205651179-ebb5492a-4ade-4bb4-a13c-965e8c927063.png">
Co-authored-by: zeripath <art27@cantab.net>
There was a serious regression in #21012 which broke the Show More
button on the diff page, and the show more button was also broken on the
file tree too.
This PR fixes this by resetting the pageData.diffFiles as the vue
watched value and reattachs a function to the show more button outside
of the file tree view.
Fix#22380
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
If you don't use the `auto` theme as the default, the `<html>` tag has
`theme-auto` as it's class when users are logged out. This PR changes it
to use the correct theme class for the default theme when logged out.
Fix#22286
When timetracking is disabled, the stop watch top bar icon should be
hidden.
When the stop watch recording popup, it should be allowed to hide with
some operation. Now click any place on this page will hide the popup
window.
Previously, the last minute of the chosen date caused bad timezone
rendering.
For example, I chose January 4th, 2023.
### Before
```html
<time data-format="date" datetime="Wed, 04 Jan 2023 23:59:59 +0000">January 5, 2023</time>
```
### After
```html
<time data-format="date" datetime="2023-01-04">January 4, 2023</time>
```
---
Closes#21999
Signed-off-by: Yarden Shoham <hrsi88@gmail.com>
Push mirrors `sync_on_commit` option was added to the web interface in
v1.18.0. However, it's not added to the API. This PR updates the API
endpoint.
Fixes#22267
Also, I think this should be backported to 1.18
If user has reached the maximum limit of repositories:
- Before
- disallow create
- allow fork without limit
- This patch:
- disallow create
- disallow fork
- Add option `ALLOW_FORK_WITHOUT_MAXIMUM_LIMIT` (Default **true**) :
enable this allow user fork repositories without maximum number limit
fixed https://github.com/go-gitea/gitea/issues/21847
Signed-off-by: Xinyu Zhou <i@sourcehut.net>
Fixes#19091
Add Feed for Releases and Tags, can be accessed through
`reponame/releases.rss`, `reponame/releases.atom`, `reponame/tags.rss`,
and `reponame/tags.atom`
Signed-off-by: Reo <reo_999@proton.me>
As recognised in #21841 the rendering of plain text files is somewhat
incorrect when there are ambiguous characters as the html code is double
escaped. In fact there are several more problems here.
We have a residual isRenderedHTML which is actually simply escaping the
file - not rendering it. This is badly named and gives the wrong
impression.
There is also unusual behaviour whether the file is called a Readme or
not and there is no way to get to the source code if the file is called
README.
In reality what should happen is different depending on whether the file
is being rendered a README at the bottom of the directory view or not.
1. If it is rendered as a README on a directory - it should simply be
escaped and rendered as `<pre>` text.
2. If it is rendered as a file then it should be rendered as source
code.
This PR therefore does:
1. Rename IsRenderedHTML to IsPlainText
2. Readme files rendered at the bottom of the directory are rendered
without line numbers
3. Otherwise plain text files are rendered as source code.
Replace #21841
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
👋 Hey
I'm new around here, so I may have done some mistakes, sorry!
---
## Context
On a fresh Gitea install, when I go to the [config admin
page](http://localhost:3000/admin/config) I had a 500 error page.
The logs:
```
2022/12/10 20:08:47 ...s/context/context.go:232:HTML() [E] [6394d93f] Render failed: template: admin/config:180:22: executing "admin/config" at <.Service.DefaultAllowOnlyContributorsToTrackTime>: DefaultAllowOnlyContributorsToTrackTime has arguments but cannot be invoked as function
2022/12/10 20:08:47 [6394d93f] router: completed GET /admin/config for [::1]:43800, 500 Internal Server Error in 5.1ms @ admin/config.go:99(admin.Config)
```
## The fix
I removed the `$.Context` on the
`.Service.DefaultAllowOnlyContributorsToTrackTime` to fix the 500 error
page happening. It could be a mistake, and I don't fully understand what
I've done!
Signed-off-by: Restray <contact@restray.org>
Close#14601Fix#3690
Revive of #14601.
Updated to current code, cleanup and added more read/write checks.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andre Bruch <ab@andrebruch.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Norwin <git@nroo.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The real sensitivity of ambiguous characters is in source code -
therefore warning about them in rendered pages causes too many warnings.
Therefore simply remove the warning on rendered pages.
The escape button will remain available and it is present on the view
source page.
Fix#20999
Signed-off-by: Andrew Thornton <art27@cantab.net>
This patch:
- Use `<button>` replace anchor link `<a>` in **_Delete/Restore
Branch_** button to avoid unexpected page jump before restore branch
actually done.
- Also replace right side buttons with `<button>` in branch list, let
some screen readers know they are buttons.
## Before
click restore branch -> restore triggered -> page refreshed, but branch
status not update -> manually refresh page
<details>
https://user-images.githubusercontent.com/76462613/197389108-5a0bd259-0455-40b2-92ac-4326900276f8.mp4
</details>
## After
waiting restore done -> page refresh -> branch status update
<details>
https://user-images.githubusercontent.com/76462613/197428683-616fcbd2-70f9-4572-bf76-e0b7f77b6dd7.mp4
</details>
Signed-off-by: baronbunny <its@baronbunny.cn>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
- Fix regression from #21893 which had misaligned a few tables like repo
lists and e-mails
- Bring githooks list in line with webhooks list for styling
- Change webhook list icons to just colored dots, like githook list
- Increase size of dot in webhook and githook list from 16 to 22px
This PR adds a button to allow quickly clearing the merge message of a
PR. The button will remove everything but the git trailers.
I found myself often pruning the commit message before merging,
especially for PRs generated by renovate - renovate puts a very long and
detailed comment with the full changelog in each PR it opens. This
clutters the commit message. However, I want to explicitly preserve the
git commit trailers. Doing this manually works, but having a button is a
lot easier.
Screenshot:
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Enable this to require captcha validation for user login. You also must
enable `ENABLE_CAPTCHA`.
Summary:
- Consolidate CAPTCHA template
- add CAPTCHA handle and context
- add `REQUIRE_CAPTCHA_FOR_LOGIN` config and docs
- Consolidate CAPTCHA set-up and verification code
Partially resolved#6049
Signed-off-by: Xinyu Zhou <i@sourcehut.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
This patch provide a mechanism to disable RSS/Atom feed.
Signed-off-by: Xinyu Zhou <i@sourcehut.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
This PR adds a context parameter to a bunch of methods. Some helper
`xxxCtx()` methods got replaced with the normal name now.
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Closes#19997
Adds an `updated_at` time field to the `PullReview` API object to
specify when the pull request review's state changed.
Signed-off-by: Yarden Shoham <hrsi88@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
_This is a different approach to #20267, I took the liberty of adapting
some parts, see below_
## Context
In some cases, a weebhook endpoint requires some kind of authentication.
The usual way is by sending a static `Authorization` header, with a
given token. For instance:
- Matrix expects a `Bearer <token>` (already implemented, by storing the
header cleartext in the metadata - which is buggy on retry #19872)
- TeamCity #18667
- Gitea instances #20267
- SourceHut https://man.sr.ht/graphql.md#authentication-strategies (this
is my actual personal need :)
## Proposed solution
Add a dedicated encrypt column to the webhook table (instead of storing
it as meta as proposed in #20267), so that it gets available for all
present and future hook types (especially the custom ones #19307).
This would also solve the buggy matrix retry #19872.
As a first step, I would recommend focusing on the backend logic and
improve the frontend at a later stage. For now the UI is a simple
`Authorization` field (which could be later customized with `Bearer` and
`Basic` switches):
The header name is hard-coded, since I couldn't fine any usecase
justifying otherwise.
## Questions
- What do you think of this approach? @justusbunsi @Gusted @silverwind
- ~~How are the migrations generated? Do I have to manually create a new
file, or is there a command for that?~~
- ~~I started adding it to the API: should I complete it or should I
drop it? (I don't know how much the API is actually used)~~
## Done as well:
- add a migration for the existing matrix webhooks and remove the
`Authorization` logic there
_Closes #19872_
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: delvh <dev.lh@web.de>
- Fix placement of avatar image, this was not placed in the
`comment-header-left` and add CSS to cover the limiting of width+height
of avatar for code-review comment on "Files changed" page. This fixes
the big noticeable avatar issue.
- Apply `margin-bottom` to the "next" button, so it's consistent with
the "previous" button.
- Make sure the "next"/"previous" start at `flex-start` on mobile and
not off-screen at `flex-end`. As well force them to have `flex: 1` so
they won't overflow on x-asis. This also requires the `width: 100%` for
the `.ui.buttons` div.
- Resolves#20074
### Before
<details><img width="512"
src="https://user-images.githubusercontent.com/25481501/195952930-09560cad-419f-43a3-a8a4-a4166c117994.jpg"></details>
### After
<details><img width="512"
src="https://user-images.githubusercontent.com/25481501/197340081-0365dfa8-4344-46b4-8702-a40c778c073f.jpg"></details>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
The OAuth spec [defines two types of
client](https://datatracker.ietf.org/doc/html/rfc6749#section-2.1),
confidential and public. Previously Gitea assumed all clients to be
confidential.
> OAuth defines two client types, based on their ability to authenticate
securely with the authorization server (i.e., ability to
> maintain the confidentiality of their client credentials):
>
> confidential
> Clients capable of maintaining the confidentiality of their
credentials (e.g., client implemented on a secure server with
> restricted access to the client credentials), or capable of secure
client authentication using other means.
>
> **public
> Clients incapable of maintaining the confidentiality of their
credentials (e.g., clients executing on the device used by the resource
owner, such as an installed native application or a web browser-based
application), and incapable of secure client authentication via any
other means.**
>
> The client type designation is based on the authorization server's
definition of secure authentication and its acceptable exposure levels
of client credentials. The authorization server SHOULD NOT make
assumptions about the client type.
https://datatracker.ietf.org/doc/html/rfc8252#section-8.4
> Authorization servers MUST record the client type in the client
registration details in order to identify and process requests
accordingly.
Require PKCE for public clients:
https://datatracker.ietf.org/doc/html/rfc8252#section-8.1
> Authorization servers SHOULD reject authorization requests from native
apps that don't use PKCE by returning an error message
Fixes#21299
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
jladbrook
yp05327
wxiaoguang
Felipe Leopoldo Sologuren Gutiérrez
KN4CK3R
Brecht Van Lommel
Jason Song
JakobDev
Francesco Siddi
techknowlogick
Lunny Xiao
Otto Richter (fnetX)
John Olheiser
silverwind
Chongyi Zheng
zeripath
crystal
Yarden Shoham
Chongyi Zheng
Gusted
Xinyu Zhou
Lauris BH
Reo
aceArt-GmbH
Restray
Mark Ormesher
花墨
Meisam
Percy Ma
kolaente
May
Nolann
oliverpool
Gusted
Xinyu Zhou
Vladimir Yakovlev
M Hickford
